19.08.2013 Views

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Table 12-1 Conference Properties - General (Continued)<br />

Field Description<br />

Chapter 12-Conference and Participant Monitoring<br />

Video Switching When selected, the conference is of ultra-high quality video<br />

resolution, in a special conferencing mode which implies that all<br />

participants must connect at the same line rate and use HD video.<br />

This feature utilizes the resources more wisely and efficiently by:<br />

• Saving utilization of video ports (1 port per participant as opposed<br />

to 4 ports in CP mode).<br />

• Video display is in full screen mode only.<br />

Drawbacks of this feature are that all participants must connect at the<br />

same line rate, (e.g. HD) and all participants with endpoints not<br />

supporting HD will connect as secondary (audio only).<br />

Video layout changes are not enabled during a conference.<br />

Video Switching supports the following resolutions:<br />

• MPM:<br />

• HD 720P<br />

• MPM+:<br />

• HD 1080p<br />

• MPMx:<br />

• 1080p30<br />

• 720p30<br />

• 720p60<br />

• SD30<br />

If HD 1080p is selected, endpoints that do not support HD 1080p<br />

resolution are connected as Secondary (Audio Only) participants.<br />

Note: Video Switching conferencing mode is unavailable to ISDN<br />

participants.<br />

For more information, see "Video Resolutions in CP Conferencing”<br />

on page 2-1.<br />

Reserve Resources<br />

for Video Participants<br />

Reserve Resources<br />

for Audio Participants<br />

Max Number of<br />

Participants<br />

Enable ISDN/PSTN<br />

Network Service<br />

ISDN/PSTN Network<br />

Service<br />

Displays the number of video participants for which the system<br />

reserved resources.<br />

Default: 0 participants.<br />

Displays the number of audio participants for which the system<br />

reserved resources.<br />

Default: 0 participants.<br />

Indicates the total number of participants that can be connected to<br />

the conference. The Automatic setting indicates the maximum<br />

number of participants that can be connected to the MCU according<br />

to resource availability.<br />

When selected, ISDN/PSTN participants can dial into the conference.<br />

When the Enable ISDN/PSTN Network Service<br />

is selected, displays the default Network Service.<br />

Dial-in Number (1) Displays the conference dial in number.<br />

Dial-in Number (2) Displays the conference dial in number.<br />

<strong>Polycom</strong>, Inc. 12-5

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!