RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

To define a Dial-in Participant as the cascade link:
This participant is added to the ongoing conference on the Slave MCU.
1 In the Participants list, click the New Participant button(
The New Participant - General dialog box opens.
).
2 Define the following parameters:
Table 4-1 New Participant – Dial-out Cascade Link
Field Description
Display Name Enter the participant name
Dialing Direction Select Dial-in.
Type Select H.323.
3 Click the Advanced tab.
Chapter 4-Cascading Conferences
IP Address If a gatekeeper is used: This field is left empty.
If a gatekeeper is not used: Enter the IP address of the Signaling
Host of the MCU running the other conference.
Alias Name If a gatekeeper is used: Enter the Alias of the MCU running the
other (second) conference.
If a gatekeeper is not used: This field is left empty.
Alias Type Select E.164 (digits 0-9, *, #).
Polycom, Inc. 4-19