RMX 2000 Administrator's Guide Version 7.6.1 - Polycom

Polycom 1500/RMX 2000/4000 Administrator’s Guide
Event Specific Fields
Table C-2 CDR Event Types (Continued)
Event Code Event Name Description
11001 CONFERENCE
START
CONTINUE 10
Additional information about a CONFERENCE START event.
This event contains the Display Name.
For more information about the fields, see Table C-7, “Event
Fields for Event 11001 - CONFERENCE START
CONTINUE 10,” on page C-14.
This list only includes events that are supported by the RMX. For a list of MGC Manager events that
are not supported by the RMX, see "MGC Manager Events that are not Supported by the RMX” on
page C-40.
The following tables describe the fields which are specific to each type of event.
Some fields that were supported by the MGC Manager, are not supported by the RMX. In addition,
for some fields the RMX has a fixed value, whereas the MGC Manager supported multiple values.
For more information about the MGC Manager fields and values, see the MGC Manager User’s
Guide Volume II, Appendix A.
Table C-3 Event Fields for Event 1 - CONFERENCE START
Field Description
Dial-Out Manually Indicates whether the conference was a dial-out manually conference or not.
Currently the only value is:
0 - The conference was not a dial-out manually conference, that is, the MCU
initiates the communication with dial-out participants, and the user does not
need to connect them manually.
Auto Terminate Indicates whether the conference was set to end automatically if no
participant joins the conference for a predefined time period after the
conference starts, or if all participants disconnect from the conference and
the conference is empty for a predefined time period.
Possible values are:
0 - The conference was not set to end automatically.
1 - The conference was set to end automatically.
Line Rate The conference line rate, as follows:
0 - 64 kbps
6 - 384 kbps
12 - 1920 kbps
13 - 128 kbps
15 - 256 kbps
23 - 512 kbps
24 - 768 kbps
26 - 1152 kbps
29 - 1472 kbps
32 - 96 kbps
C-10 Polycom, Inc.