MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN P6500
Name Sink, Service, Cast Iron
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy A | Contractor Furnished, Contractor Installed
USAF A | Contractor Furnished, Contractor Installed
VA A | Contractor Furnished, Contractor Installed
IHS A | Contractor Furnished, Contractor Installed
Utilities
NSN 4510
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing D | Cold and hot water and drain
Volts1 0
Utility2: Electrical . |
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 0
Phase2 0
Amps1 0
Amps2 0
Weight (lbs) 118 Weight (kgs) 54
Height (in) 23 Height (cen) 58
Width (in) 23 Width (cen) 58
Depth (in) 19 Depth (cen) 48
Volts2 0
Hertz 0
Hertz Dep 0
Hertz Switch 0
BTU / Hour 0
Watts1 0
Watts2 0
Description
Unit of Issue EA
Group Plumbing Fixtures
Service sink approximately 18" D x 22" W x 20" H which includes a polished chromium-plated combination hot and cold water faucet with
integral stops and extended spout. Spout will have a pail hook, 3/4 inch hose coupling thread and shall include a backflow preventer. The
faucet will be provided with a top brace and wall fittings for mounting above service sink. Service sink will be made of enameled cast
iron. Used throughout the facility in utility rooms for washing and cleaning equipment.
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 1160 of 1462