MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN A4995
Name Table, Diaper Changing, Wall Mounted
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy A | Contractor Furnished, Contractor Installed
USAF A | Contractor Furnished, Contractor Installed
VA A | Contractor Furnished, Contractor Installed
IHS A | Contractor Furnished, Contractor Installed
Utilities
NSN 7100
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 0
Utility2: Electrical . |
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 0
Phase2 0
Amps1 0
Amps2 0
Weight (lbs) 26 Weight (kgs) 12
Height (in) 21 Height (cen) 53
Width (in) 36 Width (cen) 91
Depth (in) 5 Depth (cen) 13
Volts2 0
Hertz 0
Hertz Dep 0
Hertz Switch 0
BTU / Hour 0
Watts1 0
Watts2 0
Description
Unit of Issue EA
Group Architectural
Wall mounted diaper changing table for use in public restrooms. Unit is a fold down system that folds upward when not in use for
minimal intrusion into the room. Changing surface is contoured and has safety belt to insure that an infant will not fall from the table.
Table is designed to hold no less than 250 pounds static weight. Closed dimensions are approximately 21" H x 36" W x 5" D. Open
dimensions vary according to style. One system's open dimensions are 15 " high, 32" wide and 19" deep.
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 58 of 1462