MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN CS260
Name Sink, Epoxy Resin, 10x25x15 ID
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy A | Contractor Furnished, Contractor Installed
USAF A | Contractor Furnished, Contractor Installed
VA A | Contractor Furnished, Contractor Installed
IHS A | Contractor Furnished, Contractor Installed
Utilities
NSN 4510
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing D | Cold and hot water and drain
Volts1 0
Utility2: Electrical . |
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 0
Phase2 0
Description
Unit of Issue EA
Group Fixed Casework
One-piece cast epoxy resin sink (composition of molded epoxy resins and inert materials) connected with a drain and provided with a
mixing faucet. For use in suspended or U/C/B sink cabinets and mounted under the epoxy resin countertops/work surfaces found in lab
areas requiring optimum physical chemical resisting properties. For general purpose use in a lab area.
JSN CS270
C
Amps1 0
Amps2 0
Weight (lbs) 70 Weight (kgs) 32
Height (in) 11 Height (cen) 28
Width (in) 26 Width (cen) 66
Depth (in) 16 Depth (cen) 41
Volts2 0
Hertz
Hertz Dep 0
Hertz Switch 0
BTU / Hour 0
Watts1 0
Watts2 0
Name Sink, Epoxy Resin, 11x18x15 ID
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy A | Contractor Furnished, Contractor Installed
USAF A | Contractor Furnished, Contractor Installed
VA A | Contractor Furnished, Contractor Installed
IHS A | Contractor Furnished, Contractor Installed
Utilities
NSN 4510
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing D | Cold and hot water and drain
Volts1 0
Utility2: Electrical . |
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 0
Phase2 0
Description
Unit of Issue EA
Group Fixed Casework
One-piece cast epoxy resin sink (composition of molded epoxy resins and inert materials) connected with a drain and provided with a
mixing faucet. For use in U/C/B sink cabinets and mounted under the epoxy resin countertops/work surfaces found in lab areas requiring
optimum physical chemical resisting properties. For general purpose use in a lab area.
C
Amps1 0
Amps2 0
Weight (lbs) 62 Weight (kgs) 29
Height (in) 12 Height (cen) 30
Width (in) 19 Width (cen) 48
Depth (in) 15 Depth (cen) 38
Volts2 0
Hertz 0
Hertz Dep 0
Hertz Switch 0
BTU / Hour 0
Watts1 0
Watts2 0
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 145 of 1462