MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN M4820
Name Hemodialysis Unit, Mbl, w/Reverse Osmosis System
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army C | Government Furnished, Government Installed
Navy C | Government Furnished, Government Installed
USAF C | Government Furnished, Government Installed
VA C | Government Furnished, Government Installed
IHS C | Government Furnished, Government Installed
Utilities
NSN 6515
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 120
Utility2: Electrical A | 120 volt, conventional outlet
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 1
Phase2 0
Amps1 14
Amps2 0
Weight (lbs) 175 Weight (kgs) 80
Height (in) 52 Height (cen) 132
Width (in) 23 Width (cen) 58
Depth (in) 26 Depth (cen) 66
Volts2 0
Hertz 60
Hertz Dep -1
Hertz Switch 0
BTU / Hour 0
Watts1 1680
Watts2 0
Description
Unit of Issue EA
Group Miscellaneous
Mobile renal dialysis system with a reverse osmosis water purification unit. The system consists of three major components: the dialysate
delivery system, the extracorporeal blood delivery circuit (blood pump) and the dialyzer. The system also has its own monitoring and
control circuits with temperature controls. An alarm system is automatically activated when there is changes in pressure or in the
existence of leaks. Multiple electrical circuits (one for the dialyzer, one for the reverse osmosis system) may be needed to power this
equipment combination. This dialyzer is intended for self-contained use in intensive care or step down units which do not have the water
purification machinery found in a hemodialysis clinic. See JSN M1715 for units used in a hemodialysis clinic.
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 944 of 1462