MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN S0225
Name Sterilizer, Stm, VAC, 1DO, CAB, 20x20x38 Chamber
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy A | Contractor Furnished, Contractor Installed
USAF A | Contractor Furnished, Contractor Installed
VA A | Contractor Furnished, Contractor Installed
IHS A | Contractor Furnished, Contractor Installed
Utilities
NSN 6530
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing B | Cold water and drain
Volts1 120
Utility2: Electrical F | Special electrical requirements
Utility3: Med Gas . |
Utility4: Misc Gas A | Steam
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 1
Phase2 0
Amps1 12
Amps2 0
Weight (lbs) 1320 Weight (kgs) 600
Height (in) 76 Height (cen) 193
Width (in) 30 Width (cen) 76
Depth (in) 50 Depth (cen) 127
Volts2 0
Hertz 50/60
Hertz Dep -1
Hertz Switch 0
BTU / Hour 7000
Watts1 1440
Watts2 0
Description
Unit of Issue EA
Group Sterilizers and Associated Equipment
A cabinet mounted, single power door (vertical sliding), vacuum, sterilizer utilizing facility supplied steam. The unit is controlled by a
microcomputer that monitors and controls all unit operations and functions and provides both audible and visual indications of
deviations. A printer-recorder documents and records each cycle performance. For general purpose pre-vacuum or gravity steam
sterilization of hospital and laboratory supplies at temperatures in the range from 110°C to 135°C (230°F to 275°F). A liquid cycle is also
provided at temperatures in the range from 100°C to 121°C (212°F to 250°F).
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 1215 of 1462