MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN T0180
Name Cabinet, Storage, Tool, F/Mounted
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy A | Contractor Furnished, Contractor Installed
USAF A | Contractor Furnished, Contractor Installed
VA A | Contractor Furnished, Contractor Installed
IHS A | Contractor Furnished, Contractor Installed
Utilities
NSN 7100
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 0
Utility2: Electrical . |
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 0
Phase2 0
Amps1 0
Amps2 0
Weight (lbs) 551 Weight (kgs) 251
Height (in) 84 Height (cen) 213
Width (in) 60 Width (cen) 152
Depth (in) 24 Depth (cen) 61
Volts2 0
Hertz 0
Hertz Dep 0
Hertz Switch 0
BTU / Hour 0
Watts1 0
Watts2 0
Description
Unit of Issue EA
Group Shop Equipment/Tools
The cabinet shall be designed to store and secure tools and will be non mobile.
JSN T0280
Name Drill Press, Bnch/Mntd
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army C | Government Furnished, Government Installed
Navy C | Government Furnished, Government Installed
USAF C | Government Furnished, Government Installed
VA C | Government Furnished, Government Installed
IHS C | Government Furnished, Government Installed
Utilities
NSN 3413
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 115
Utility2: Electrical A | 120 volt, conventional outlet
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 1
Phase2 0
Amps1 7
Amps2 0
Weight (lbs) 96 Weight (kgs) 44
Height (in) 37 Height (cen) 94
Width (in) 12 Width (cen) 30
Depth (in) 30 Depth (cen) 76
Volts2 0
Hertz 60
Hertz Dep -1
Hertz Switch 0
BTU / Hour 0
Watts1 805
Watts2 0
Description
Unit of Issue EA
Group Shop Equipment/Tools
Shall be a bench mounted drill press with a 10 inch minimum capacity and variable speed. The motor shall have a minimum capacity of
1/3 HP.
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 1268 of 1462