MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN X4140
Name Scanner, X-Ray Film Digitizer
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army F | Government Furnished, Government Installed
Navy F | Government Furnished, Government Installed
USAF F | Government Furnished, Government Installed
VA F | Government Furnished, Government Installed
IHS F | Government Furnished, Government Installed
Utilities
NSN 6525
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 120
Utility2: Electrical A | 120 volt, conventional outlet
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc D | Empty conduit with pull cord
Phase1 1
Phase2 0
Amps1 1
Amps2 0
Weight (lbs) 90 Weight (kgs) 41
Height (in) 30 Height (cen) 76
Width (in) 21 Width (cen) 53
Depth (in) 29 Depth (cen) 74
Volts2 0
Hertz 50/60
Hertz Dep 0
Hertz Switch 0
BTU / Hour 0
Watts1 120
Watts2 0
Description
Unit of Issue EA
Group X-Ray Equipment and Accessories
X-ray film scanner to permit filmed images to be converted to digital format. Device uses computer controlled laser beam to read the film
data and converts the beam data to digital image data. Scan modes shall be 12-bit (4096) grayscale, 8-bit (256) grayscale or bi-level.
Geometric accuracy shall be better than 1% or 2 pixels, whichever is greater, in both axes. Optical density range from 0.01 to 3.0. Shall
accept all standard film sizes. Selectable scan speed for a 14" x 17" file are 11, 13, 26, and 51 seconds. Shall conform to the SCSI-2
specification. SCSI termination and ID selection are accessible on the unit. The system shall be DICOM 3.0 or latest version compatible,
for easy linkage to filmless image management systems and review stations.
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 1362 of 1462