MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN A1085
Name Mirror, SS, With SS Frame, 36x18
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy A | Contractor Furnished, Contractor Installed
USAF A | Contractor Furnished, Contractor Installed
VA A | Contractor Furnished, Contractor Installed
IHS A | Contractor Furnished, Contractor Installed
Utilities
NSN 6530
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 0
Utility2: Electrical . |
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 0
Phase2 0
Amps1 0
Amps2 0
Weight (lbs) 30 Weight (kgs) 14
Height (in) 36 Height (cen) 91
Width (in) 18 Width (cen) 46
Depth (in) 1 Depth (cen) 3
Volts2 0
Description
Unit of Issue EA
Group Architectural
A highly polished, stretcher leveled, stainless steel mirror, framed in a one-piece, bright polished, stainless steel channel frame with 90°
mitered corners. All edges of the mirror are protected by absorbing filler strips. Mirror has a galvanized steel back with integral horizontal
hanging brackets and wall hanger for concealed mounting. For use in areas of a facility where a float glass mirror is not desired for
reasons of patient and staff safety. This mirror is not intended for use in a maximum-security patient area.
Hertz
Hertz Dep 0
Hertz Switch 0
BTU / Hour 0
Watts1 0
Watts2 0
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 37 of 1462