MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN M3105
Name Cabinet, Warming, F/S, 1 Heated Compartment, Elect
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy A | Contractor Furnished, Contractor Installed
USAF A | Contractor Furnished, Contractor Installed
VA A | Contractor Furnished, Contractor Installed
IHS A | Contractor Furnished, Contractor Installed
Utilities
NSN 6530
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 120
Utility2: Electrical F | Special electrical requirements
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 1
Phase2 0
Amps1 12
Amps2 0
Weight (lbs) 190 Weight (kgs) 87
Height (in) 36 Height (cen) 91
Width (in) 30 Width (cen) 76
Depth (in) 27 Depth (cen) 69
Volts2 0
Hertz 60
Hertz Dep 0
Hertz Switch -1
BTU / Hour 0
Watts1 1440
Watts2 0
Description
Unit of Issue EA
Group Miscellaneous
Freestanding, single or double door warming cabinet with 1 compartment. Compartment and exterior walls are made of stainless steel.
Thick fiberglass insulation maintains the interior temperature and prevents the exterior surface from becoming too hot. Equipped with a
sealing door, thermostatic temperature control, status display, heat indicating light, over temperature protection, alarms and an air
circulating fan. Unit may have an optional temperature recorder. Manufacturer recommends using a fused disconnect switch in the
electrical power circuit. Cabinet may also be installed in a recess. Designed for heating and storing of solutions and blankets used in
patient care areas.
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 910 of 1462