MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN D0940
Name Workstation, Dental Lab, Equipment Bench
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy A | Contractor Furnished, Contractor Installed
USAF A | Contractor Furnished, Contractor Installed
VA A | Contractor Furnished, Contractor Installed
IHS A | Contractor Furnished, Contractor Installed
Utilities
NSN 6520
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 0
Utility2: Electrical . |
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 0
Phase2 0
Description
Unit of Issue EA
Group Dental Equipment and Dental Casework
Modular workstation for investment equipment which includes 2 floor-mounted single or double door storage cabinets with adjustable
shelves and a cast cement/fiberglass counter top.
JSN D0942
A
A
A
Amps1 0
Amps2 0
Weight (lbs) 250 Weight (kgs) 114
Height (in) 36 Height (cen) 91
Width (in) 47 Width (cen) 119
Depth (in) 24 Depth (cen) 61
Volts2 0
Hertz 0
Hertz Dep 0
Hertz Switch 0
BTU / Hour 0
Watts1 0
Watts2 0
Name Workstation, Dental Lab, Microblasting
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy F | Government Furnished, Government Installed
USAF F | Government Furnished, Government Installed
VA F | Government Furnished, Government Installed
IHS F | Government Furnished, Government Installed
Utilities
NSN 6520
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 120
Utility2: Electrical A | 120 volt, conventional outlet
Utility3: Med Gas D | Air, high pressure (85 PSIG) max
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 1
Phase2 0
Amps1 10
Amps2 0
Weight (lbs) 250 Weight (kgs) 114
Height (in) 52 Height (cen) 132
Width (in) 36 Width (cen) 91
Depth (in) 30 Depth (cen) 76
Volts2 0
Hertz 60
Hertz Dep 0
Hertz Switch 0
BTU / Hour
Watts1 1200
Watts2 0
Description
Unit of Issue EA
Group Dental Equipment and Dental Casework
Complete micro-blaster and dust extraction device integrated into a 34" high x 24" wide x 24" deep (nominal) cabinet. The micro-blaster
can use 25 to 250 micron aluminum oxide, sand, glass bead or walnut shell abrasives. The unit includes micro-blasting pencils, canisters
for clean blasting, one recirculating nozzle for gross blasting, an air chisel, an air nozzle and a protective safety shield. The micro-blaster
connects to a dust extraction system suitably sized for the micro-blaster.
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 187 of 1462