MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN L2205
Name Hood, Fume, Floor Standing, Explosion Proof
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy A | Contractor Furnished, Contractor Installed
USAF A | Contractor Furnished, Contractor Installed
VA A | Contractor Furnished, Contractor Installed
IHS A | Contractor Furnished, Contractor Installed
Utilities
NSN 6640
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing I | Drain only
Volts1 120
Utility2: Electrical B | 120 volt, special outlet
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc E | Vent to atmosphere
Phase1 1
Phase2 0
Amps1 15
Amps2 0
Weight (lbs) 822 Weight (kgs) 374
Height (in) 103 Height (cen) 262
Width (in) 48 Width (cen) 122
Depth (in) 33 Depth (cen) 84
Volts2 0
Hertz 60
Hertz Dep -1
Hertz Switch 0
BTU / Hour 0
Watts1 1800
Watts2 0
Description
Unit of Issue EA
Group Laboratory Equipment
Floor standing fume hood. A 4 foot model is specified, other sizes available. It will include an incandescent or fluorescent light fixture (if
compatible with being explosion proof), blower switch with pilot light, at least one duplex receptacle, a cup sink and shall be acid resistant.
The minimum average face velocity shall be 100 fpm. It Includes a steel framed safety glass sash resistant to heat of up to 71 degrees
centigrade. Static pressure loss is not to exceed 0.22 inches. The fume hood also has adjustable baffles. Other custom options are
available. Used in laboratories to prepare samples requiring the use of toxic and or flammable materials. Unit shall be explosion proof
and suitable for use with organic volatile substances. Duplex receptacle will be external to the hood work area. All fittings will be
explosion proof.
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 756 of 1462