MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN T0030
Name Radiation-Light Field Analyzer
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army C | Government Furnished, Government Installed
Navy C | Government Furnished, Government Installed
USAF C | Government Furnished, Government Installed
VA C | Government Furnished, Government Installed
IHS C | Government Furnished, Government Installed
Utilities
NSN 6525
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 120
Utility2: Electrical A | 120 volt, conventional outlet
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 1
Phase2 0
Amps1 2
Amps2 0
Weight (lbs) 18 Weight (kgs) 8
Height (in) 6 Height (cen) 15
Width (in) 10 Width (cen) 26
Depth (in) 21 Depth (cen) 53
Volts2 0
Hertz 60
Hertz Dep -1
Hertz Switch 0
BTU / Hour 0
Watts1 240
Watts2 0
Description
Unit of Issue EA
Group Shop Equipment/Tools
Light and radiation field analyzer for quality assurance testing of radiation therapy devices. Unit is self contained and checks the
coincidence of light and radiation fields, symmetry of radiation field, flatness of radiation field, and penumbra size of the radiation field.
Unit has a built in graphics printer for hard copy output of scanned information.
JSN T0090
Name Bench, Loom
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army C | Government Furnished, Government Installed
Navy C | Government Furnished, Government Installed
USAF C | Government Furnished, Government Installed
VA C | Government Furnished, Government Installed
IHS C | Government Furnished, Government Installed
Utilities
NSN 3630
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 0
Utility2: Electrical . |
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 0
Phase2 0
Amps1 0
Amps2 0
Weight (lbs) 23 Weight (kgs) 11
Height (in) 25 Height (cen) 64
Width (in) 32 Width (cen) 81
Depth (in) 14 Depth (cen) 36
Volts2 0
Hertz 0
Hertz Dep 0
Hertz Switch 0
BTU / Hour 0
Watts1 0
Watts2 0
Description
Unit of Issue EA
Group Shop Equipment/Tools
The loom bench shall be approximately 24" H x 11" D x 32" W and made of wood. It shall have a storage area below the seat. This bench
seat is used during the operation of a floor loom.
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 1264 of 1462