MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN K1930
Name Cutter/Mixer, Electric, 10-15 Qt Capacity
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy A | Contractor Furnished, Contractor Installed
USAF A | Contractor Furnished, Contractor Installed
VA A | Contractor Furnished, Contractor Installed
IHS A | Contractor Furnished, Contractor Installed
Utilities
NSN 7310
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 208
Utility2: Electrical G | 208/220 volt, 3 phase
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 1
Phase2 0
Amps1 15
Amps2 0
Weight (lbs) 130 Weight (kgs) 59
Height (in) 23 Height (cen) 58
Width (in) 17 Width (cen) 43
Depth (in) 27 Depth (cen) 68
Volts2 0
Hertz 60
Hertz Dep -1
Hertz Switch -1
BTU / Hour 0
Watts1 3120
Watts2 0
Description
Unit of Issue EA
Group Food Service Equipment
Electric cutter-mixer with a 10-15 quart capacity bowl. The bowl is stainless steel and the bowl cover arm has a safety interlock with the
motor to keep the motor from running while the cover is open. The two speed motor is enclosed in a easily cleaned metal base. Larger
sizes are available. Refer also to specification MIL-F-43569.
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 598 of 1462