MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN T0870
Name Machine, Sewing, Industrial, Medium Duty
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army C | Government Furnished, Government Installed
Navy C | Government Furnished, Government Installed
USAF C | Government Furnished, Government Installed
VA C | Government Furnished, Government Installed
IHS C | Government Furnished, Government Installed
Utilities
NSN 7290
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 120
Utility2: Electrical A | 120 volt, conventional outlet
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 1
Phase2 0
Amps1 7
Amps2 0
Weight (lbs) 187 Weight (kgs) 85
Height (in) 45 Height (cen) 114
Width (in) 24 Width (cen) 61
Depth (in) 21 Depth (cen) 53
Volts2 0
Hertz 60
Hertz Dep 0
Hertz Switch 0
BTU / Hour 0
Watts1 750
Watts2 0
Description
Unit of Issue EA
Group Shop Equipment/Tools
Industrial sewing machine. Characteristics/components include medium duty, high-speed; light harness stitcher on stand unit; 1/2 HP
motor; stitch speed of 1800 stitches per minute (S.P.M.); maximum thread size of 3 cord; and adjustable stand heights. This machine is
used for leather garment work, light or medium stitching at high speeds on upholstery or slip covers, etc.
JSN T0875
Name Machine, Sign Making
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy A | Contractor Furnished, Contractor Installed
USAF A | Contractor Furnished, Contractor Installed
VA A | Contractor Furnished, Contractor Installed
IHS A | Contractor Furnished, Contractor Installed
Utilities
NSN 3611
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 120
Utility2: Electrical A | 120 volt, conventional outlet
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 1
Phase2 0
Amps1 5
Amps2 0
Weight (lbs) 54 Weight (kgs) 25
Height (in) 16 Height (cen) 41
Width (in) 22 Width (cen) 56
Depth (in) 20 Depth (cen) 51
Volts2 0
Hertz 60
Hertz Dep -1
Hertz Switch 0
BTU / Hour 0
Watts1 600
Watts2 0
Description
Unit of Issue EA
Group Shop Equipment/Tools
Sign making and engraving machine. The machine has a powering motor, moveable spindle housing, cutting bit and trays to hold the
uncut stock and letter blanks. The machine has adjustable arms for making different size lettering from the same letter blank. Automated
models are available.
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 1280 of 1462