MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN M2200
Name Compactor, 1.5 - 6 CuYd, Receiver 15 - 40 CuYd Cap
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy A | Contractor Furnished, Contractor Installed
USAF A | Contractor Furnished, Contractor Installed
VA A | Contractor Furnished, Contractor Installed
IHS A | Contractor Furnished, Contractor Installed
Utilities
NSN 3930
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 208
Utility2: Electrical D | 120 and 208/220 volt
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 3
Phase2 1
Amps1 21
Amps2 10
Weight (lbs) 11130 Weight (kgs) 5053
Height (in) 105 Height (cen) 267
Width (in) 100 Width (cen) 254
Depth (in) 281 Depth (cen) 714
Volts2 120
Hertz 60
Hertz Dep -1
Hertz Switch 0
BTU / Hour 0
Watts1 7566
Watts2 1200
Description
Unit of Issue EA
Group Miscellaneous
Hydraulic ram waste compactor with a minimum ram face pressure of at least 2000 PSI. Receiving box varies with manufacturer from 1.5
to 6 cubic yards capacity. Able to accommodate waste receiving boxes from 15 to 40 cubic yard capacity. Feed station with sealed
connection between compactor and container to control leakage. Manufacturers offer various units with sizes and capacities designed to
meet specific waste compaction requirements. General purpose compacting system for institutional use.
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 895 of 1462