MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN CS200
Name Sink, SS, Single Compartment, 12x28x16 ID
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy A | Contractor Furnished, Contractor Installed
USAF A | Contractor Furnished, Contractor Installed
VA A | Contractor Furnished, Contractor Installed
IHS A | Contractor Furnished, Contractor Installed
Utilities
NSN 6530
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing D | Cold and hot water and drain
Volts1 0
Utility2: Electrical . |
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 0
Phase2 0
Amps1 0
Amps2 0
Weight (lbs) 36 Weight (kgs) 17
Height (in) 12 Height (cen) 30
Width (in) 31 Width (cen) 79
Depth (in) 22 Depth (cen) 56
Volts2 0
Description
Unit of Issue EA
Group Fixed Casework
Single compartment stainless steel sink, drop-in, self-rimming, ledge-type, connected with a drain and provided with a mixing faucet. It
shall also be provided with pre-punched fixture holes on 4" center, integral back ledge to accommodate deck-mounted fixtures,
brushed/polished interior and top surfaces, and sound deadened. Recommended for use in suspended or U/C/B sink cabinets having a
high plastic laminate or Chemsurf laminate countertop/work surface. Coordinate actual outside sink dimensions with the actual clear
dimension of cabinet specified to ensure that they are compatible. For general purpose use throughout the facility.
Hertz
Hertz Dep 0
Hertz Switch 0
BTU / Hour 0
Watts1 0
Watts2 0
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 140 of 1462