MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN S9800
Name Sterilizer,Stm,VAC,1DO,RCSD1WLL,F/M, Large Chamber
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy A | Contractor Furnished, Contractor Installed
USAF A | Contractor Furnished, Contractor Installed
VA A | Contractor Furnished, Contractor Installed
IHS A | Contractor Furnished, Contractor Installed
Utilities
NSN 6530
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing B | Cold water and drain
Volts1 120
Utility2: Electrical F | Special electrical requirements
Utility3: Med Gas D | Air, high pressure (85 PSIG) max
Utility4: Misc Gas A | Steam
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 1
Phase2 0
Amps1 10
Amps2 0
Weight (lbs) 4500 Weight (kgs) 2043
Height (in) 95 Height (cen) 241
Width (in) 53 Width (cen) 135
Depth (in) 123 Depth (cen) 312
Volts2 0
Hertz 0
Hertz Dep -1
Hertz Switch 0
BTU / Hour 26800
Watts1 1200
Watts2 0
Description
Unit of Issue EA
Group Sterilizers and Associated Equipment
A floor mounted, recessed through one wall, power single door steam sterilizer, with approximately 26"W x 62"H x 42"D chamber (right
or left-hinged, appropriate door configurations to be indicated on equipment elevation drawings), vacuum, sterilizer utilizing facility
supplied steam. The unit is controlled by a microcomputer that monitors and controls all unit operations and functions and provides both
audible and visual indications of deviations. A printer-recorder documents and records each cycle performance. Unit provided with a
hydraulic cart lift at the door to raise and lower processing carts. For high-volume sterilization of wrapped dry goods and hard goods in
hospitals and laboratories. Pre-vacuum cycle temperature in the range from 110°C to 135°C (230°F to 275°F). A gravity and liquid cycle is
also provided at temperatures in the range from 100°C to 135°C (212°F to 275°F).
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 1257 of 1462