MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN L2275
Name Hood, Fume, Radioisotope, Bench, w/Glovebox
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy A | Contractor Furnished, Contractor Installed
USAF A | Contractor Furnished, Contractor Installed
VA A | Contractor Furnished, Contractor Installed
IHS A | Contractor Furnished, Contractor Installed
Utilities
NSN 6640
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 120
Utility2: Electrical F | Special electrical requirements
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc C | Remote alarm ground
Phase1 1
Phase2 0
Amps1 16
Amps2 0
Weight (lbs) 800 Weight (kgs) 364
Height (in) 84 Height (cen) 213
Width (in) 63 Width (cen) 160
Depth (in) 32 Depth (cen) 81
Volts2 0
Hertz 60
Hertz Dep -1
Hertz Switch 0
BTU / Hour 0
Watts1 1920
Watts2 0
Description
Unit of Issue EA
Group Laboratory Equipment
Bench type radioisotope fumehood. Characteristics/components include a glove-box, a 75 cfm. blower with indicating switch and variable
speed power stat and manometer mounted on box front to indicate air flow, 1/4" safety glass viewing panel, three polarized and
grounded electrical outlets with indicating switches, a 24 inch fluorescent light with fixtures and switch, two 8 inch double grooved glove
ports and neoprene gloves, an inlet filter, two absolute filters with connecting hoses and 40 inches of 2 inch spiral exhaust hose with
clamps and a variable height mobile bench, 30-37"H. Unit is customized to fit the specified use requirements.
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 761 of 1462