MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN S0405
Name Sterilizer, STM, GV, 1DO, CAB, 24x36x48 Chamber
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy A | Contractor Furnished, Contractor Installed
USAF A | Contractor Furnished, Contractor Installed
VA A | Contractor Furnished, Contractor Installed
IHS A | Contractor Furnished, Contractor Installed
Utilities
NSN 6530
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing B | Cold water and drain
Volts1 120
Utility2: Electrical F | Special electrical requirements
Utility3: Med Gas D | Air, high pressure (85 PSIG) max
Utility4: Misc Gas A | Steam
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 1
Phase2 0
Amps1 15
Amps2 0
Weight (lbs) 3300 Weight (kgs) 1499
Height (in) 77 Height (cen) 196
Width (in) 59 Width (cen) 150
Depth (in) 74 Depth (cen) 188
Volts2 0
Hertz 50/60
Hertz Dep -1
Hertz Switch 0
BTU / Hour 14650
Watts1 1800
Watts2 0
Description
Unit of Issue EA
Group Sterilizers and Associated Equipment
A cabinet mounted, single door (right or left-hinged, appropriate door configurations to be indicated on equipment elevation drawings),
gravity, sterilizer utilizing facility supplied steam. The unit is controlled by a microcomputer that monitors and controls all unit operations
and functions and provides both audible and visual indications of deviations. A printer-recorder documents and records each cycle
performance. For general purpose gravity steam sterilization of hospital and laboratory supplies at temperatures in the range from 100°C
to 138°C (212°F to 280°F). A liquid cycle is also provided at temperatures in the range from 100°C to 123°C (212°F to 254°F). One
manufacturer requires air for their manual door operation only. Power door operation is available from this manufacturer.
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 1221 of 1462