MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN D8620
Name Bin, Plaster, 3 Compartment
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy A | Contractor Furnished, Contractor Installed
USAF A | Contractor Furnished, Contractor Installed
VA A | Contractor Furnished, Contractor Installed
IHS A | Contractor Furnished, Contractor Installed
Utilities
NSN 6520
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 0
Utility2: Electrical . |
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 0
Phase2 0
Amps1 0
Amps2 0
Weight (lbs) 40 Weight (kgs) 19
Height (in) 21 Height (cen) 53
Width (in) 21 Width (cen) 53
Depth (in) 10 Depth (cen) 25
Volts2 0
Description
Unit of Issue EA
Group Dental Equipment and Dental Casework
Above counter or wall mounted three compartment plaster bin. The bin can be made from stainless steel or heavy duty plastic and is
used in dental laboratories to hold and gravity feed plaster materials. The bin has a total plaster capacity of 75 pounds. The overall bin
size varies by manufacturer.
JSN D8650
Hertz
Hertz Dep 0
Hertz Switch 0
BTU / Hour 0
Watts1 0
Watts2 0
Name Chute, Waste, Plaster, Counter Mounted
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy A | Contractor Furnished, Contractor Installed
USAF A | Contractor Furnished, Contractor Installed
VA A | Contractor Furnished, Contractor Installed
IHS A | Contractor Furnished, Contractor Installed
Utilities
NSN 6520
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 0
Utility2: Electrical . |
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 0
Phase2 0
Amps1 0
Amps2 0
Weight (lbs) 1 Weight (kgs) 1
Height (in) 4 Height (cen) 10
Width (in) 7 Width (cen) 18
Depth (in) 7 Depth (cen) 18
Volts2 0
Description
Unit of Issue EA
Group Dental Equipment and Dental Casework
Counter mounted plaster waste chute. The chute is generally made of stainless steel and is available in either a round or square
configuration. The chute is mounted over a waste receptacle and is used to dispose of waste material through the countertop. The chute
is usually specified and purchased as part of the countertop rather than as a separate item.
Hertz
Hertz Dep 0
Hertz Switch 0
BTU / Hour 0
Watts1 0
Watts2 0
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 225 of 1462