MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN D9010
Name Cabinet, Blast Cleaning, F/S
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy A | Contractor Furnished, Contractor Installed
USAF A | Contractor Furnished, Contractor Installed
VA A | Contractor Furnished, Contractor Installed
IHS A | Contractor Furnished, Contractor Installed
Utilities
NSN 6520
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 120
Utility2: Electrical A | 120 volt, conventional outlet
Utility3: Med Gas D | Air, high pressure (85 PSIG) max
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 1
Phase2 0
Amps1 15
Amps2 0
Weight (lbs) 250 Weight (kgs) 114
Height (in) 84 Height (cen) 213
Width (in) 58 Width (cen) 147
Depth (in) 40 Depth (cen) 102
Volts2 0
Hertz 60
Hertz Dep -1
Hertz Switch 0
BTU / Hour 0
Watts1 1800
Watts2 0
Description
Unit of Issue EA
Group Dental Equipment and Dental Casework
Blast cleaning cabinet. Used in dental laboratories for removing investment and oxide film from metal castings. Unit has internal light,
foot switch and a viewing window. Unit requires an air supply capable of 4 cubic feet per minute at 80 pounds per square inch.
JSN D9015
Name Microfinisher, Dental, Counter Mounted
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy A | Contractor Furnished, Contractor Installed
USAF A | Contractor Furnished, Contractor Installed
VA A | Contractor Furnished, Contractor Installed
IHS A | Contractor Furnished, Contractor Installed
Utilities
NSN 6520
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 120
Utility2: Electrical A | 120 volt, conventional outlet
Utility3: Med Gas D | Air, high pressure (85 PSIG) max
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 1
Phase2 0
Amps1 10
Amps2 0
Weight (lbs) 55 Weight (kgs) 25
Height (in) 23 Height (cen) 58
Width (in) 17 Width (cen) 43
Depth (in) 16 Depth (cen) 41
Volts2 0
Hertz 60
Hertz Dep -1
Hertz Switch 0
BTU / Hour 0
Watts1 1200
Watts2 0
Description
Unit of Issue EA
Group Dental Equipment and Dental Casework
Dental air abrasive micro-finisher. Unit is dual system with individual micro-nozzles, individual controls and gauges for use with oxide
abrasives or glass beads. It has view-port and sleeved arm holes. Used in dental laboratories for fine finish work on appliances.
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 228 of 1462