MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN K3350
Name Grinder, Meat, 80 Lb./Minute Capacity
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy A | Contractor Furnished, Contractor Installed
USAF A | Contractor Furnished, Contractor Installed
VA A | Contractor Furnished, Contractor Installed
IHS A | Contractor Furnished, Contractor Installed
Utilities
NSN 7310
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 208
Utility2: Electrical G | 208/220 volt, 3 phase
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 3
Phase2 0
Amps1 23
Amps2 0
Weight (lbs) 440 Weight (kgs) 200
Height (in) 43 Height (cen) 109
Width (in) 29 Width (cen) 74
Depth (in) 52 Depth (cen) 132
Volts2 0
Hertz 60
Hertz Dep -1
Hertz Switch 0
BTU / Hour 0
Watts1 8286
Watts2 0
Description
Unit of Issue EA
Group Food Service Equipment
Meat grinder. The unit has a 7 HP or larger motor and is capable of grinding 85 pounds of meat per minute through a 1/8 inch plate on
the first cutting. The grinder has an electrical safety interlock to prevent operation when the feed pan is removed. All surfaces which
come in contact with the meat are stainless steel, chrome or heavily tinned cast iron and are easily exposed or removed for cleaning. A
variety of slicing attachments are available.
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 640 of 1462