MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN X3940
Name Illuminator, Film, 8 Panels, Wall Mounted
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy A | Contractor Furnished, Contractor Installed
USAF A | Contractor Furnished, Contractor Installed
VA A | Contractor Furnished, Contractor Installed
IHS A | Contractor Furnished, Contractor Installed
Utilities
NSN 6525
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 120
Utility2: Electrical A | 120 volt, conventional outlet
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 1
Phase2 0
Amps1 8
Amps2 0
Weight (lbs) 184 Weight (kgs) 84
Height (in) 44 Height (cen) 112
Width (in) 59 Width (cen) 150
Depth (in) 6 Depth (cen) 15
Volts2 0
Hertz 60
Hertz Dep 0
Hertz Switch 0
BTU / Hour 0
Watts1 960
Watts2 0
Description
Unit of Issue EA
Group X-Ray Equipment and Accessories
Film illuminator, 8 panels, wall mounted. This unit has a stainless steel or light gray baked enamel finish. It consists of two 4-panel
illuminators, with dual switches and torque grip film holders. The lower illuminator is tilted 35 degrees from the vertical while the upper
illuminator is vertical (on two tier unit). It is arranged to facilitate handling of the films and especially effective for seated viewing. The
unit is used to review and analyze X-ray films.
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 1353 of 1462