MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN D0270
Name Cabinet, Base, Sink, Angle Corner, 36x53x24
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy A | Contractor Furnished, Contractor Installed
USAF A | Contractor Furnished, Contractor Installed
VA A | Contractor Furnished, Contractor Installed
IHS A | Contractor Furnished, Contractor Installed
Utilities
NSN 6520
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing D | Cold and hot water and drain
Volts1 0
Utility2: Electrical . |
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 0
Phase2 0
Amps1 0
Amps2 0
Weight (lbs) 200 Weight (kgs) 91
Height (in) 37 Height (cen) 94
Width (in) 53 Width (cen) 135
Depth (in) 40 Depth (cen) 102
Volts2 0
Description
Unit of Issue EA
Group Dental Equipment and Dental Casework
Angle corner base cabinet unit. Used in dental laboratories to hold a casting machine, sink or for general storage. The cabinet has a 13-
18" wide front face depending on the manufacturer and its sides will match adjacent cabinet units. The back walls of the cabinet may be
shortened so the interior space does not reach all the way back to the wall corner. At its widest point, the largest cabinet found is
approximately 53" from apex to apex. Depending on the manufacturer, the unit occupies the first 32-37.5" of wall space out from a room
corner along both walls. Some manufacturers' pricing includes the cabinet top.
Hertz
Hertz Dep 0
Hertz Switch 0
BTU / Hour 0
Watts1 0
Watts2 0
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 157 of 1462