MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN T0810
Name Stand, Jack, Shoe Repair
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army C | Government Furnished, Government Installed
Navy C | Government Furnished, Government Installed
USAF C | Government Furnished, Government Installed
VA C | Government Furnished, Government Installed
IHS C | Government Furnished, Government Installed
Utilities
NSN 7290
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 0
Utility2: Electrical . |
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 0
Phase2 0
Amps1 0
Amps2 0
Weight (lbs) 88 Weight (kgs) 40
Height (in) 48 Height (cen) 122
Width (in) 10 Width (cen) 25
Depth (in) 10 Depth (cen) 25
Volts2 0
Description
Unit of Issue EA
Group Shop Equipment/Tools
Shoe repair jack stand. Characteristics/components include five men's and women's lasts; top locks in place or spins free; top is controlled
with the turn of a knob and the top section is long enough to keep boots clear of the knob. This stand is used to form and repair shoes in
brace and limb shops.
JSN T0850
Hertz
Hertz Dep 0
Hertz Switch 0
BTU / Hour 0
Watts1 0
Watts2 0
Name Cutter, Sole, Bench Mounted
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army C | Government Furnished, Government Installed
Navy C | Government Furnished, Government Installed
USAF C | Government Furnished, Government Installed
VA C | Government Furnished, Government Installed
IHS C | Government Furnished, Government Installed
Utilities
NSN 7290
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 120
Utility2: Electrical A | 120 volt, conventional outlet
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 1
Phase2 0
Amps1 2
Amps2 0
Weight (lbs) 60 Weight (kgs) 28
Height (in) 20 Height (cen) 51
Width (in) 20 Width (cen) 51
Depth (in) 18 Depth (cen) 46
Volts2 0
Hertz 60
Hertz Dep -1
Hertz Switch 0
BTU / Hour 0
Watts1 240
Watts2 0
Description
Unit of Issue EA
Group Shop Equipment/Tools
Bench mounted, hand operated cutter. This is a five-in-one functional machine that skives, cuts, trims, bevels edges and presses edges of
bonded surfaces. Can be used on plastic, rubber and leather materials. Unit has a 9” throat clearance. Used in shoe repair and
orthotic/prosthetic shops.
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 1278 of 1462