MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN V0045
Name Washer, Pressure, Veterinary, Hot Water
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy A | Contractor Furnished, Contractor Installed
USAF A | Contractor Furnished, Contractor Installed
VA A | Contractor Furnished, Contractor Installed
IHS A | Contractor Furnished, Contractor Installed
Utilities
NSN 6530
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing D | Cold and hot water and drain
Volts1 120
Utility2: Electrical A | 120 volt, conventional outlet
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 1
Phase2 0
Amps1 20
Amps2 0
Weight (lbs) 95 Weight (kgs) 44
Height (in) 39 Height (cen) 99
Width (in) 22 Width (cen) 56
Depth (in) 34 Depth (cen) 86
Volts2 0
Hertz 60
Hertz Dep -1
Hertz Switch 0
BTU / Hour 0
Watts1 2400
Watts2 0
Description
Unit of Issue EA
Group Veterinary
Veterinary hot water pressure washer. This is a compact pressure washer that is easily transported and prepared for operation.
Characteristics/components include trigger control that enables the operator to shut off the water flow away from the machine; a
detachable power unit with built-in carrying handles; soap/ rinse cycles controlled by the nozzle on the wand; and variable pressure for
different cleaning jobs. This unit is used for cleaning veterinary equipment in hospitals.
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 1308 of 1462