MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN T0761
Name Bench, Woodworking, Locker Base, 33 x 120 x 30
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army C | Government Furnished, Government Installed
Navy C | Government Furnished, Government Installed
USAF C | Government Furnished, Government Installed
VA C | Government Furnished, Government Installed
IHS C | Government Furnished, Government Installed
Utilities
NSN 7195
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 0
Utility2: Electrical . |
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 0
Phase2 0
Amps1 0
Amps2 0
Weight (lbs) 212 Weight (kgs) 97
Height (in) 33 Height (cen) 84
Width (in) 120 Width (cen) 305
Depth (in) 24 Depth (cen) 61
Volts2 0
Description
Unit of Issue EA
Group Shop Equipment/Tools
Woodworking workbench. This is a locker based unit with a laminated maple top. The lockers include padlock hasp, spring hinges and
provision for cylinder locks. The top is sturdy laminated maple. This unit is used in woodworking shops. It consists of base cabinets and
one maple top. Final configuration to be determined by end user.
JSN T0780
Hertz
Hertz Dep 0
Hertz Switch 0
BTU / Hour 0
Watts1 0
Watts2 0
Name Saw, Circular, Woodworking
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army C | Government Furnished, Government Installed
Navy C | Government Furnished, Government Installed
USAF C | Government Furnished, Government Installed
VA C | Government Furnished, Government Installed
IHS C | Government Furnished, Government Installed
Utilities
NSN 3220
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 120
Utility2: Electrical A | 120 volt, conventional outlet
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 1
Phase2 0
Amps1 17
Amps2 0
Weight (lbs) 438 Weight (kgs) 199
Height (in) 40 Height (cen) 102
Width (in) 60 Width (cen) 152
Depth (in) 49 Depth (cen) 124
Volts2 0
Hertz 60
Hertz Dep -1
Hertz Switch 0
BTU / Hour 0
Watts1 2040
Watts2 0
Description
Unit of Issue EA
Group Shop Equipment/Tools
Circular woodworking saw. Characteristics/components include large cast iron table (22" X 37" with extension) that provides solid work
support and prevents warping and distortion; capability to cut stock 2- 9/16" thick at 90 degrees and 1-13/16" at 45 degrees; rips to
center of 48" panel; 1 HP motor; and 10" diameter blade. The unit is used for cutting wood in woodworking shops.
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 1276 of 1462