MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN L2290
Name Hood, Laminar Flow, Horizontal, Bench Top, 4ft
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army C | Government Furnished, Government Installed
Navy C | Government Furnished, Government Installed
USAF C | Government Furnished, Government Installed
VA C | Government Furnished, Government Installed
IHS C | Government Furnished, Government Installed
Utilities
NSN 6640
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 120
Utility2: Electrical B | 120 volt, special outlet
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 1
Phase2 0
Amps1 12
Amps2 0
Weight (lbs) 370 Weight (kgs) 168
Height (in) 52 Height (cen) 132
Width (in) 51 Width (cen) 130
Depth (in) 35 Depth (cen) 89
Volts2 0
Hertz 60
Hertz Dep -1
Hertz Switch 0
BTU / Hour 4910
Watts1 1440
Watts2 0
Description
Unit of Issue EA
Group Laboratory Equipment
Bench top horizontal laminar flow fumehood. The unit meets or exceeds Class 100 requirements set for Federal Standard 209B. The unit
characteristics/components are: HEPA filters, a washable and reusable pre-filter, work surface and side walls of type 304 stainless steel,
duplex electrical receptacles, high velocity return air slots to provide an air curtain at the work area, work surface and side walls and a
blower to provide an average velocity of 100 fpm. Used for work with non-hazardous materials where clean particle-free air is required. 4
Foot model represented, other sizes are available.
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 763 of 1462