MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN A1107
Name Rail System , Utility, Gas and Electric
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy A | Contractor Furnished, Contractor Installed
USAF A | Contractor Furnished, Contractor Installed
VA A | Contractor Furnished, Contractor Installed
IHS A | Contractor Furnished, Contractor Installed
Utilities
NSN 6530
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 0
Utility2: Electrical F | Special electrical requirements
Utility3: Med Gas G | Oxygen, vacuum and medical air (50 PSIG)
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc A | Earth ground
Phase1 0
Phase2 0
Amps1 0
Amps2 0
Weight (lbs) 0 Weight (kgs) 0
Height (in) 96 Height (cen) 244
Width (in) 120 Width (cen) 305
Depth (in) 10 Depth (cen) 25
Volts2 0
Hertz 0
Hertz Dep 0
Hertz Switch 0
BTU / Hour 0
Watts1 0
Watts2 0
Description
Unit of Issue EA
Group Architectural
The headwall rail system shall consist of three horizontal rails mounted to the patient room headwall to provide utilities and patient
services to support ancillary equipment to include gas and vacuum. The rail system must be capable of quickly adding or relocating
medical gases services and be able to accept new equipment, provide physical support to equipment, brackets, shelves and other patient
support items.
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 41 of 1462