MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN X1427
Name Imager, Dry Chemistry, 8" X 10"
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army C | Government Furnished, Government Installed
Navy C | Government Furnished, Government Installed
USAF C | Government Furnished, Government Installed
VA C | Government Furnished, Government Installed
IHS C | Government Furnished, Government Installed
Utilities
NSN 6525
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing . |
Volts1 120
Utility2: Electrical B | 120 volt, special outlet
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 1
Phase2 0
Amps1 12
Weight (lbs) 287 Weight (kgs) 131
Height (in) 41 Height (cen) 104
Width (in) 29 Width (cen) 74
Depth (in) 28 Depth (cen) 71
Volts2 0
Hertz 50/60
Hertz Dep 0
Hertz Switch 0
Description
Unit of Issue EA
Group X-Ray Equipment and Accessories
The imager shall produce a high resolution, continuous-tone images that incorporates a dry imaging and developing process for ready-toview,
8" x 10" films as they exit the system. The use of wet fixer, developer and water for processing of film is not required. No hazardous
wastes (as defined by the EPA) shall be produced. Shall have 2,256 X 2,676 pixels, spatial resolutions. One or two inputs (digital or video)
are standard and expandable up to four with the optional input manage systems. Shall conform to DIN-PACS and DICOM V3.0 or latest
version. Primary applications are C-arm, digital X-ray, nuclear medicine and ultrasound.
Amps2
BTU / Hour 700
Watts1 1440
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 1336 of 1462
Watts2