MIL-STD 1691 Master Equipment List - The Whole Building Design ...

JSN X7000
Name Center, Mixing, Barium
Logistical Category (LOGCAT) Fund Source Weights and Measures (Typical Only)
Army A | Contractor Furnished, Contractor Installed
Navy A | Contractor Furnished, Contractor Installed
USAF A | Contractor Furnished, Contractor Installed
VA A | Contractor Furnished, Contractor Installed
IHS A | Contractor Furnished, Contractor Installed
Utilities
NSN 6525
NOTE: Values shown are based on standard typicals used for programming purposes. The contractor remains responsible to
develop and coordinate the design / construction in accordance with actual equipment selection.
Utility1: Plumbing D | Cold and hot water and drain
Volts1 120
Utility2: Electrical A | 120 volt, conventional outlet
Utility3: Med Gas . |
Utility4: Misc Gas . |
Utility5: Non-Med Gas . |
Utility6: Misc . |
Phase1 1
Phase2 0
Amps1 7
Amps2 0
Weight (lbs) 11 Weight (kgs) 5
Height (in) 15 Height (cen) 38
Width (in) 8 Width (cen) 20
Depth (in) 9 Depth (cen) 23
Volts2 0
Hertz 60
Hertz Dep -1
Hertz Switch -1
BTU / Hour 0
Watts1 840
Watts2 0
Description
Unit of Issue EA
Group X-Ray Equipment and Accessories
Barium mixing center for Radiology. The mixing container is made of glass or stainless steel with handles. The two speed model is
available with or without a 60-second timer and has speeds of 18,000 or 22,000 RPM. The unit is equipped with a two piece vinyl/styrene
lid and include either a 1.2L glass or 1L stainless steel container. The unit has surgical steel mixing blades and a snug fitting lid. The
controls are two toggle switches mounted on the front. The unit is equipped with a heavy duty three foot (910 mm) cord and a 3-wire
ground plug. The unit is a mixer for barium which is used in x-ray medical photography of the alimentary canal.
Thursday, April 21, 2011 MIL-STD 1691 | PPMD
Page 1396 of 1462