Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
Example - Level and Frequency Measurement
COPY
SCREEN
½ Press the COPY SCREEN softkey.
The output of the whole screen content to a file is
selected.
½ Insert a floppy into the floppy disk drive.
HARDCOPY
START
½ Press the START key in the HARDCOPY field.
The output is started. A window is displayed where
the file name and the path must be entered using
the built-in auxiliary line editor or the external
keyboard, eg
A:\ display.wmf.
DATA ENTRY
dBm
mV MHz
ms
½ Press one of the unit keys, eg MHz.
The screen content is stored on the floppy under the
specified file name.
During storing the softkeys are blanked. Operation
in the menus can be continued when the softkeys
are displayed again.
The file can be used in other Windows applications,
ie it can be linked.
Fig. 2-7 gives an example of a stored display. In the
example, two limit lines are active and four markers
positioned in the spectrum.
1088.7531.12 2.15 E-3