Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
Receiver - Search Functions
ACTIVE
MKR DELTA
The ACTIVE MKR / DELTA softkey toggles between the active marker and
the active delta marker.
If DELTA is illuminated, the following search functions are performed with the
active delta marker.
Note:
Switching between marker and delta marker entry modes may
also be performed using the NORMAL and DELTA keys.
IEC/IEEE bus command --
SELECT
MARKER
The SELECT MARKER softkey activates the selection of the marker/delta
markers. The selection box lists the currently enabled markers/delta markers.
MARKER SELECT
MARKER 1
MARKER 3
MARKER 4
DELTA SELECT
DELTA 1
DELTA 2
DELTA 3
IEC/IEEE bus command --
PEAK
The PEAK softkey sets the active marker/delta marker to the peak of the
corresponding trace.
IEC/IEEE bus commands :CALCulate:MARK:MAXimum
:CALCulate:DELT:MAXimum
NEXT PEAK
The NEXT PEAK softkey sets the active marker/delta marker to the next
lower peak on the corresponding trace.
IEC/IEEE bus command
:CALCulate:MARKer:MAX:NEXT
:CALCulate:DELT:MAX:NEXT
NEXT PEAK
RIGHT
The NEXT PEAK RIGHT softkey sets the active marker to the next peak to
the right of the current marker.
IEC/IEEE bus command
:CALCulate:MARK:MAX:RIGHt
:CALCulate:DELT:MAX:RIGHt
NEXT PEAK
LEFT
The NEXT PEAK LEFT softkey sets the active marker to the next peak to the
left of the current marker.
IEC/IEEE bus command
:CALCulate:MARK:MAX:LEFT
:CALCulate:DELT:MAX:LEFT
TUNE TO
MARKER
The TUNE TO MARKER softkey sets the receiver frequency to the marker
frequency.
IEC/IEEE bus command
:CALCulate:MARKer:FUNCtion:CENTer
1088.7531.12 4.129 E-15