Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
Display Configuration
Display Screen Configuration
SYSTEM DISPLAY-CONFIG DISPLAY submenu:
CONFIG
DISPLAY
CONFIG
DISPLAY
SELECT
OBJECT
BRIGHTNESS
TINT
SATURATION
DEFAULT
COLORS
PREDEFINED
COLORS
LOGO
ON OFF
FREQUENCY
ON OFF
DATAENTRY
FIELD
CONFIG
DISPLAY
TIME
ON OFF
DISPLAY
COMMENT
SCR SAVER
ON OFF
SCR SAVER
TIME
The CONFIG DISPLAY softkey calls a submenu, in
which the selection of color and brightness for the
individual elements on the display screen takes
place. The actual selection of the elements takes
place in the corresponding menu table.
The color assignment of the softkeys is coupled with
the color assignment of other display elements.
Changing for example the color of SOFTKEY
STATE OFF causes the color of the table
background to be changed at the same time. The
same applies to SOFTKEY STATE DATA ENTRY
and display lines, and to SOFTKEY STATE ON and
enhancement labels.
In the right side menu, date, time and a diagram
label can be displayed on the screen and the energy
saving mode can be activated.
The FREQUENCY ON/OFF softkey is not available
in receiver mode.
SELECT
OBJECT
The SELECT OBJECT softkey activates the SELECT DISPLAY OBJECT
table, with which a graphics element can be selected. After selection, the
brightness, tint and saturation of the selected element can be changed using
the softkeys of the same name. The color changes can be seen immediately
on the display screen.
SELECT DISPLAY OBJECT
TRACE 1
TRACE 2
TRACE 3
TRACE 4
MARKER
GRID
SOFTKEY STATE ON
SOFTKEY STATE DATA ENTRY
SOFTKEY STATE OFF
SOFTKEY SHADE
TEXT
TITLE
BACKGROUND
BRIGHTNESS
TINT
The BRIGHTNESS softkey is used to enter the brightness of the color for the
selected element. The range of input values is 0 to 100%.
IEC/IEEE- bus command :DISPlay:CMAP:HSL ,,
The TINT softkey is used to enter the color tint of the selected element. The
percentage that is entered specifies a point in a color spectrum ranging from
red (0%) to blue (100%).
The TINT function is not available for monochrome (black/white) displays.
IEC/IEEE- bus command :DISPlay:CMAP:HSL ,,
1088.7531.12 4.7 E-15