Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

Instrument Status and Measurement Parameters
ESIB
Instrument Status and Measurement Parameters – INFO Key
SYSTEM INFO menu:
SYSTEM
PRESET CAL
DISPLAY INFO
INFO
INSTRUMENT
SETTINGS
FIRMWARE
VERSIONS
HARDWARE+
OPTIONS
SELFTEST
SYSTEM
MESSAGES
The INFO key is used to request general information
concerning the instrument. These include:
• firmware version
• installed hardware and hardware options
• modification level of the individual modules
• self-test results with the option of calling self-test
functions
• list of generated system messages
• installed firmware and hardware options.
• Statistical evaluations
OPTIONS
STATISTIC
HELP
Firmware Versions
SYSTEM INFO menu:
FIRMWARE
VERSION
The FIRMWARE VERSIONS softkey opens two tables, which provide the
following informations:
• Table MODEL displays the exact instrument model.
ESIB26
MODEL
• In the FIRMWARE VERSION table, the version of each software
component installed in the instrument is listed. The versions of
programmable logic devices are also included if the firmware version of
the device can be determined.
FIRMWARE VERSION
BIOS 1.2
RECEIVER 1.65
SERIAL NUMBER 101379/005
IEC/IEEE- bus command
:*IDN?
1088.7531.12 4.14 E-15