Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

Options
ESIB
Installation of Network Services
To utilize the resources of the network it is necessary to install the corresponding services.
Note: The network administrator knows which services are to be used.
½ Select "Services".
½ Click "Add", mark the desired service and
select with "OK".
This operation has to be performed
several times when several services are
selected.
Some services are pre-installed and can
be cleared with "Remove" if they are not
needed.
½ Execute the installation by clicking
"Continue".
Note: If a service requires further settings,
they can be performed with
"Properties" after marking the corresponding
entry. If further settings are
not possible, this field is gray.
Terminating the Installation
½ Quit the "Network" configuration menu for
network settings with "OK".
The settings are checked and processed.
Missing information is queried.
½ Answer the query "You must shutdown..."
with "Yes".
The settings are valid after computer restart.
Note:
After the installation, the "Service
Pack" of Windows NT is to be reinstalled,
see "New Installation of
Windows NT Software".
1088.7531.12 1.46 E-3