Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
SENSe Subsystem
:[SENSe:]CORRection:CVL:PORTs 2 | 3
This command defines the type of mixer in the Conversion Loss Table.
Example: ":CORR:CVL:PORT 3"
Features: *RST value: -
SCPI: device-specific
Mode:
A
Command SENS:CORR:CVL:SEL must be sent prior to this command. This command is only valid
in conjunction with option External Mixer Output, FSE-B21.
:[SENSe:]CORRection:CVL:BIAS
This command defines the bias current in the Conversion Loss Table.
Example: ":CORR:CVL:BIAS 7mA"
Features: *RST value: -
SCPI: device-specific
Mode:
A
Command SENS:CORR:CVL:SEL must be sent prior to this command. This command is only valid
in conjunction with option External Mixer Output, FSE-B21.
:[SENSe:]CORRection:CVL:COMMent
This command defines the comment in the Conversion Loss Table.
Parameter: ::= Comment of mixer with a maximum of 60 characters
Example: ":CORR:CVL:COMMENT ’MIXER FOR BAND U’"
Features: *RST value: -
SCPI: device-specific
Mode:
A
Command SENS:CORR:CVL:SEL must be sent prior to this command. This command is only valid
in conjunction with option External Mixer Output, FSE-B21.
:[SENSe:]CORRection:CVL:DATA ,..
This command defines the reference values of the selected Conversion Loss Tabels. The values are
entered as a result of frequency/level pairs. The frequencies have to be sent in ascending order.
Example: ":CORR:CVL:DATA 1MHZ,-30DB,2MHZ,-40DB"
Features: *RST value: -
SCPI: device-specific
Mode:
A
Command SENS:CORR:CVL:SEL must be sent prior to this command. This command is only valid
in conjunction with option External Mixer Output, FSE-B21.
1088.7531.12 6.117 E-15