Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
DISPlay Subsystem
:DISPlay[:WINDow]:TIME ON | OFF
This command switches on or off the screen display of date and time.
Example: ":DISP:TIME ON"
Features: *RST value: OFF
SCPI: device-specific
Modes:
R, A, VA
The numeric suffix in WINDow is not significant.
:DISPlay[:WINDow]:TRACe:X[:SCALe]:RVALue
This command defines the reference value for the X-axis of the measuring diagram.
Example: ":DISP:TRAC:X:RVAL 20SYM"
Features: *RST value: -
SCPI: device-specific
Mode:
VA-D
:DISPlay[:WINDow]:TRACe:X[:SCALe]:ZOOM ON | OFF
This command displays the zoomed current frequency range in the opposite window of the split
screen representation.
Example: ":DISP:TRAC:X:ZOOM ON"
Features: *RST value: OFF
SCPI: device-specific
Mode:
A-F
The numeric suffix in TRACe is not significant.
:DISPlay[:WINDow]:TRACe:X[:SCALe]:ZOOM[:FREQuency]:STARt
This command defines the start frequency of the zoomed display range. The value must lie between
start and stop frequency of the original range.
Example: ":DISP:TRAC:X:ZOOM:STAR 100MHZ"
Features: *RST value: -- (depending on the current frequency setting)
SCPI: device-specific
Mode:
A-F
The numeric suffix in TRACe is not significant.
:DISPlay[:WINDow]:TRACe:X[:SCALe]:ZOOM[:FREQuency]:STOP
This command defines the stop frequency of the zoomed display range. The value must lie between
start and stop frequency of the original range.
Example: ":DISP:TRAC:X:ZOOM:STOP 200MHZ"
Features: *RST value: -- (depending on the current frequency setting)
SCPI: device-specific
Mode:
A-F
The numeric suffix in TRACe is not significant.
1088.7531.12 6.67 E-15