Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
HCOPy Subsystem
:HCOPy:ITEM:WINDow:TABLe:STATe ON | OFF
This command selects the output of the currently displayed tables (ON).
Example: ":HCOP:ITEM:WIND:TABL:STAT ON"
Features: *RST value: OFF
SCPI: device-specific
Modes:
R, A, VA
The command :HCOPy:ITEM:WINDow:TABLe:STATe
:HCOPy:ITEM:ALL enables the output of the whole screen.
OFF same as command
:HCOPy:ITEM:WINDow:TEXT
This command defines the comment text for printout to trace 1 or 2 with a maximum of 100
characters.
Example: ":HCOP:ITEM:WIND2:TEXT ‘comment’"
Features: *RST value: -
SCPI: device-specific
Modes:
R, A, VA
:HCOPy:ITEM:WINDow:TRACe:STATe ON | OFF
This command selects the output of the currently displayed trace (ON).
Example: ":HCOP:ITEM:WIND:TRACe:STAT ON"
Features: *RST value: OFF
SCPI: device-specific
Modes:
R, A, VA
The command :HCOPy:ITEM:WINDow:TRACe:STATe OFF same as command
:HCOPy:ITEM:ALL enables the output of the whole screen.
:HCOPy:ITEM:WINDow:TRACe:CAINcrement ON | OFF
The command automatically changes the colour of the currently displayed trace after printout (ON).
Example: ":HCOP:ITEM:WIND:TRACe:CAIN ON"
Features: *RST value: OFF
SCPI: device-specific
Modes:
R, A, VA
The automatic change of colour of the trace allows outputting to a plotter of several traces of the
same diagram. For a better distinction, the colour of the trace is changed (”Color Auto Increment”).
1088.7531.12 6.79 E-15