Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
CALCulate Subsystem
:CALCulate:LIMit:ACPower[:STATe] ON | OFF
This command switches on and off the limit check for adjacent channel power measurements. The
commands CALC:LIM:ACP:ACH:STAT or CALC:LIM:ACP:ALT:STAT must be used in addition to
specify whether the limit check is to be performed for the upper/lower adjacent channel or for the
alternate adjacent channels.
Examples:
":CALC:LIM:ACP ON"
Features: *RST value: OFF
SCPI: device-specific
Modes:
A, VA
The numeric suffixes or are not significant for this command.
:CALCulate:LIMit:ACPower:ACHannel 0 to 100 dB, 0 to 100 dB
This command defines the limit for the upper/lower adjacent channel for adjacent channel power
measurements.
Parameter:
Examples:
The first (second) numeric value is the limit for the upper (lower) adjacent
channel.
":CALC:LIM:ACP:ACH 30DB, 30DB"
Features: *RST value: 0 dB
SCPI: device-specific
Modes:
A, VA
The numeric suffixes or are not significant for this command.
:CALCulate:LIMit:ACPower:ACHannel:STATe ON | OFF
This command activates the limit check for the adjacent channel when adjacent channel power
measurement is performed. Before, the limit check must be activated using CALC:LIM:ACP ON.
Examples:
":CALC:LIM:ACP:ACH:STAT ON"
Features: *RST value: OFF
SCPI: device-specific
Modes:
A, VA
The numeric suffixes or are not significant for this command.
:CALCulate:LIMit:ACPower:ACHannel:RESult?
This command queries the result of the limit check for the upper/lower adjacent channel when
adjacent channel power measurement is performed.
Parameter: The result is returned in the form , where
= PASSED | FAILED, and where the first returned value denotes the
lower, the second denotes the upper adjacent channel.
Examples: ":CALC:LIM:ACP:ACH:RES?"
Features: *RST value: --
SCPI: device-specific
Modes:
A, VA
This command is a query and therefore not assigned a *RST value. If the power measurement of the
adjacent channel is switched off, the command triggers a query error.
The numeric suffixes or are not significant for this command.
1088.7531.12 6.29 E-15