Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

SENSe Subsystem
ESIB
:[SENSe:]CORRection:CVL:MIXer
This command defines the type designation of the mixer in the Conversion Loss Table.
Parameter: ::= Type designation of mixer with a maximum of 16 characters
Example: ":CORR:CVL:MIX ’FSE_Z60’"
Features: *RST value: -
SCPI: device-specific
Mode:
A
Command SENS:CORR:CVL:SEL must be sent prior to this command. This command is only valid
in conjunction with option External Mixer Output, FSE-B21.
:[SENSe:]CORRection:CVL:SNUMber
This command defines the serial number of the mixer in the Conversion Loss Table.
Parameter: ::= Serial number of mixer with a maximum of 16 characters
Example: ":CORR:CVL:SNUM ’123.4567’"
Features: *RST value: -
SCPI: device-specific
Mode:
A
Command SENS:CORR:CVL:SEL must be sent prior to this command. This command is only valid
in conjunction with option External Mixer Output, FSE-B21.
:[SENSe:]CORRection:CVL:BAND A|Q|U|V|E|W|F|D|G|Y|J
This command defines the waveguide band in the Conversion Loss Table.
Example: ":CORR:CVL:BAND E"
Features: *RST value: -
SCPI: device-specific
Mode:
A
Command SENS:CORR:CVL:SEL must be sent prior to this command. This command is only valid
in conjunction with option External Mixer Output, FSE-B21.
:[SENSe:]CORRection:CVL:TYPE ODD | EVEN | EODD
This command defines the type of harmonic in the Conversion Loss Table.
Example: ":CORR:CVL:TYPE EODD"
Features: *RST value: -
SCPI: device-specific
Mode:
A
Command SENS:CORR:CVL:SEL must be sent prior to this command. This command is only valid
in conjunction with option External Mixer Output, FSE-B21.
1088.7531.12 6.116 E-15