Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
Command Assignment - General Device Settings
SCREENS
UNCOUPLED
CONFIG
DISPLAY
SELECT
OBJECT
BRIGHTNESS
:INSTrument:COUPle NONE | ALL
--
--
DISPlay:CMAP:HSL ,,
TINT
DISPlay:CMAP:HSL ,,
SATURATION
DISPlay:CMAP:HSL ,,
DEFAULT
COLORS
PREDEFINED
COLORS
LOGO
ON/OFF
FREQUENCY
ON/OFF
DATA ENTRY
FIELD
TIME
ON OFF
DISPLAY
COMMENT
SCR.SAVER
ON OFF
SCR.SAVER
TIME
DATAENTRY
X
DATAENTRY
Y
DEFAULT
POSITION
DATAENTRY
OPAQUE
DISPlay:CMAP:DEFault
DISPlay:CMAP:PDEFined BLACk | BLUE | BROWn | GREen | CYAN | RED
| MAGenta | YELLow | WHITe | DGRAy | LGRAy | LBLUe | LGREen | LCYan |
LRED | LMAGenta
DISPlay:LOGO ON | OFF
DISPlay:ANNotation:FREQuency ON | OFF
The softkey is available only in analyzer mode
--
no corresponding IEC/IEEE-bus command
no corresponding IEC/IEEE-bus command
no corresponding IEC/IEEE-bus command
no corresponding IEC/IEEE-bus command
:DISPlay[:WINDow]:TIME ON | OFF
:DISPlay[:WINDow]:TEXT[:DATA]
:DISPlay[:WINDow]:TEXT:STATe ON | OFF
DISPlay:PSAVer[:STATe] ON | OFF
DISPlay:PSAVer:HOLDoff
CAL
CAL
SHORT
CALibration:SHORt?
CAL
TOTAL
CAL
RES BW
CALibration[:ALL]?
CALibration:BANDwidth|BWIDth[:RESolution]?
1088.7531.12 6.220 E-15