Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
Receiver - Traces
AVERAGE
The AVERAGE softkey activates the average detector.
The average detector supplies the straight average of the
signal during the measurement time.
IEC\IEEE bus command
:[SENSe:]DETector[:FUNCtion] AVERage
RMS
The RMS softkey activates the rms detector.
The rms detector supplies the rms value of the signal. The
mean of squares of all sampled values is formed during the
measurement time.
IEC\IEEE bus command
:[SENSe:]DETector[:FUNCtion] RMS
MIN PEAK
The MIN PEAK softkey activates the min peak detector.
IEC\IEEE bus command
:[SENSe:]DETector[:FUNCtion] NEGative
AC VIDEO
The DETECTOR AC VIDEO softkey activates the AC VIDEO
detector. The softkey is available only if the instrument is
equipped with the linear video output option (option ESIB-B1).
IEC\IEEE bus command
:[SENSe:]DETector[:FUNCtion] ACVideo
FINAL
MAX PEAK
The FINAL MAX PEAK selects the max peak detector for the
final measurement.
IEC\IEEE bus command
:[SENSe:]DETector:FMEasurement POSitive
FINAL
QUASIPEAK
The FINAL QUASIPEAK selects the quasi peak detector for
the final measurement.
IEC\IEEE bus command
:[SENSe:]DETector:FMEasurement QPEak
FINAL
AVERAGE
The FINAL AVERAGE selects the average detector for the
final measurement.
IEC\IEEE bus command
:[SENSe:]DETector:FMEasurement AVERage
FINAL
RMS
The FINAL RMS selects the rms detector for the final
measurement.
IEC\IEEE bus command
:[SENSe:]DETector:FMEasurement RMS
1088.7531.12 4.147 E-15