Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

Options
ESIB
½ Click "Next".
The window for starting a test page is
displayed. The test print is for checking if
the installation was successful.
½ Switch on printer.
½ Click Yes (recommended)".
½ Click "Finish".
A test page is printed out if the installation
was successful.
If the test page is not printed out or not
completely, the Windows NT online help
offers troubleshooting instructions under
the entry "Printer Trouble Shooting".
The instrument has to be configured with
this printer for the printout of the
measurement screen. This configuration is
described in this chapter in the section
"Connecting an Output Device".
Server Function
With the server function data can be provided on the instrument for use in other computers. This is
possible only in the MICROSOFT network. The server function is released after network installation as
standard. If this is not required, it should be deactivated, see "Installation of Network Services".
The availability of instrument data in the network is controlled by releases. The release is a property of
a file or of a directory. To grant a release, the object is to be marked in "Windows NT Explorer" and
pressed by the right-hand mouse key. The release is performed under Properties -> Sharing by
selecting "Shared As". Other computers can then access these objects with the names allocated under
"Share Name". The online help gives further information on the network operation.
TCP/IP
The TCP/IP protocol allows files to be transmitted between different computer systems. A program
running on both computers is required to control the data transfer. The same operating or file system
need not be used by the two partners. A file transfer is possible between DOS/WINDOWS and UNIX,
for example. One partner has to be configured as host the other as client or vice versa. The system
performing several processes at the same time (UNIX) will normally be the host. The usual file transfer
program used for TCP/IP is FTP (File Transfer Protocol). An FTP host is installed as standard on most
of the UNIX systems.
After installing the TCP/IP services, a terminal link can be established with "Start" - "Programs" -
"Accessories" - "Telnet" or a data transmission with FTP using "Start" - "Run" "ftp" - "OK". Thus, all
controller systems can be accessed which support these universal protocols (UNIX, VMS, ...).
Further information is given in the NT online help which can be called up with "Help".
1088.7531.12 1.52 E-3