Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

Display Configuration
ESIB
Measurement Window Coupling
For the most part, the settings for the two windows can be either independently performed or coupled to
one another. In many cases, when changes are made in one window (e.g., the reference level) it is
desirable to also make the corresponding changes in the second window. The measurement window
parameters which are to be coupled may be selected in the SCREEN COUPLING menu.
SYSTEM DISPLAY-SCREEN COUPLING submenu:
SCREEN
COUPLING
SCREEN
COUPLING
MODE
COUPLED
The SCREEN COUPLING softkey calls a sub-menu in
which the coupling between the two measurement
windows SCREEN A and SCREEN B can be defined. This
coupling is only effective when both windows are
displayed (SPLIT SCREEN).
HORIZONTAL
SCALING
In the default setting, all of the items which are selectable
are also coupled.
VERTICAL
SCALING
COUPLING
CONTROL
...
SCREENS
UNCOUPLED
MODE
COUPLED
The MODE COUPLED softkey switches the coupling of the operating mode
(Analyzer, Vector Analyzer) on/off.
IEC/IEEE- bus command :INSTrument:COUPle MODE
HORIZONTAL
SCALING
The HORIZONTAL SCALING softkey switches the coupled scaling of the
horizontal axes on and off. In the frequency domain, the center frequency and
the frequency span are identical. In the time domain, the sweep time for both
windows is the same.
IEC/IEEE- bus command :INSTrument:COUPle X
VERTICAL
SCALING
COUPLING
CONTROL
The VERTICAL SCALING softkey switches the coupled scaling of the vertical
axes on and off. For a level measurement, this means that the reference level
and the vertical resolution (LEVEL RANGE) are set to the same values in
both windows.
IEC/IEEE- bus command : INSTrument:COUPle Y
The COUPLING CONTROL softkey switches the coupling of the trigger and
gate parameters and of SWEEP COUNT and SWEEP SINGLE/
CONTINOUS on/off.
IEC/IEEE- bus command :INSTrument:COUPle CONTrol
SCREENS
UNCOUPLED
The SCREENS UNCOUPLED softkey switches all of the possible couplings
between the measurement windows to off.
IEC/IEEE- bus command : INSTrument:COUPle NONE | ALL
1088.7531.12 4.6 E-15