Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB- Receiver
ESIB
CONFIGURATION MODE - EMI RECEIVER menu:
DETECTOR
DETECTOR
MAX PEAK
QUASIPEAK
AVERAGE
RMS
The DETECTOR softkey opens a submenu to select the
detector.
Multiple detection is activated by switching on up to four single
detectors. The MIN PEAK, RMS and AC VIDEO detector
cannot be switched on simultaneously.
Softkey AC VIDEO is available only if the instrument is
equipped with the linear video output (option ESIB-B1).
MIN PEAK
AC VIDEO
QP RBW
COUPLED
MAX PEAK
The MAX PEAK softkey activates the max peak detector.
IEC/IEEE-bus command
:[SENSe:]DETector:RECeiver[:FUNCtion] POSitive
QUASIPEAK
The QUASIPEAK softkey selects the quasi-peak detector.
The quasi-peak detector yields the maximum detected value
weighted to CISPR 16 during the set measurement time. The IF
bandwidth is adapted as a function of the frequency range. The
coupling of the IF bandwidth to the frequency range can be
cancelled using softkey QP RBW UNCOUPLED.
IEC/IEEE-bus command
:[SENSe:]DETector:RECeiver[:FUNCtion] QPEak
AVERAGE
The AVERAGE softkey activates the average detector.
The average detector supplies the straight average of the signal
during the measurement time.
IEC/IEEE-bus command
:[SENSe:]DETector:RECeiver[:FUNCtion] AVERage
1088.7531.12 4.82 E-15