Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
SYSTem Subsystem
:SYSTem:COMMunicate:SERial[:RECeive]:BITS 7 | 8
This command defines the number of data bits per data word for the given serial interface.
Example: ":SYST:COMM:SER2:BITS 7"
Features: *RST value: 8
SCPI: conforming
Modes:
R, A, VA
SERial1 and SERial 2 correspond to device interface COM1 and COM2, respectively.
:SYSTem:COMMunicate:SERial[:RECeive]:PARity[:TYPE] EVEN | ODD | NONE
This command defines the parity check for the given serial interface.
Example: ":SYST:COMM:SER:PAR EVEN"
Features: *RST value: NONE
SCPI: conforming
Modes:
R, A, VA
SERial1 and SERial 2 correspond to device interface COM1 and COM2, respectively. Permissible
values are: EVEN even parity
ODD odd parity
NONE no parity check.
:SYSTem:COMMunicate:SERial[:RECeive]:SBITs 1|2
This command defines the number of stopbits per data word for the given serial interface.
Example: ":SYST:COMM:SER:SBITs 2"
Features: *RST value: 1
SCPI: conforming
Modes:
R, A, VA
SERial1 and SERial 2 correspond to device interface COM1 and COM2, respectively.
:SYSTem:COMMunicate:SERial[:RECeive]:PACE XON | NONE
This command switches on or off the software handshake for the given serial interface.
Example: ":SYST:COMM:SER:PACE XON"
features: *RST value: NONE
SCPI: conforming
Modes:
R, A, VA
SERial1 and SERial 2 correspond to device interface COM1 and COM2, respectively.
1088.7531.12 6.169 E-15